As per the report, many users face boot issues with Lenovo Tab P11 Plus. The tab stuck on the logo and won’t able to continue the booting process. Are you also suffering from the boot issue with your Lenovo Tab P11 Plus? If yes, then this guide will help you eliminate this issue with just a few proven fixes.
Typically, the boot loop issue occurs due to several reasons such as:
- Minor bugs in the software of the phone.
- The phone software malfunctioned due to some malicious third-party apps.
- Cluttered data stored in the phone cache memory.
There could be other possible reasons behind this issue too, but the above are some of the most obvious.
Lenovo Tab P11 Plus Stuck on Logo
To cope with the boot loop issues on your Lenovo tab P11 Plus, run the troubleshooting process with the help of some proven fixes discussed in detail below:
Force Restart
Sometimes, a minor glitch in the device software happens to cause such an issue. These types of minor problems can be very well eliminated by performing a soft reset on your device. To do that, there are very simple steps to follow below:
- Press and hold the “Power” button for several seconds until your tablet restarts.
- Once the tablet restarts successfully, now wait until it boots up again.
If you face the boot loop issue, then head over to the next fix below.
Wipe Cache Partition
Another fix that can lead you to eliminate this particular issue is by booting into the recovery mode of your smartphone. By doing so, you will be then able to wipe the cache partition. This method removes all the temporary files that might be causing issues to your device.
Steps To Follow below:
- Switch OFF your smartphone.
- To enter into recovery mode, press and hold the Power and Volume UP buttons until you see the bootloader mode appears with the Android robot.
- Use the volume buttons to switch between different options and the power button to select the desired option.
- Select the “Recovery mode” option.
- In recovery mode options, select the “Wipe Cache Partition” option.
- When the wipe cache partition process completes successfully, now reboot your phone by selecting the “Reboot the System Now” option.
That’s it, you are done with clearing the system cache. Now, check whether your tablet is still stuck on the logo or continue with the booting process.
Safe mode
Safe mode is one of the best methods in the troubleshooting process. While in safe mode disables all the third-party apps and allows the built apps only. If the tab successfully boots into safe mode, then there might be no issues with the third-party apps installed on your tab.
Else, you would need to hard reset your tab to remove all the third-party apps from your tablet. How To enter into safe mode with the help of hard keys on Lenovo Tab P11 Plus,
- At the start-up, press and hold the “Volume Down” button.
- If your tab successfully enters safe mode, then you will be able to see the “Safe mode” label at the bottom left corner of the screen.
Perform Hard Reset
This method is very effective and worth considering when facing any kind of issue on your device. This will restore all the settings to the factory default settings. But you need to take a complete backup of your important data as it will wipe all the available data on your device.
Here are the steps below:
- Switch OFF your smartphone.
- To enter into recovery mode, press and hold the Power and Volume UP buttons until you see the Lenovo logo appears on the screen.
- Once, you are in the Android recovery mode, use the volume buttons to switch between different options and the power button to select the desired option.
- Select the “Recovery mode” option.
- In recovery mode options, select the “Wipe Data/Factory Reset” option and then confirm it by pressing the “Yes” option.
- When the hard reset operation completes successfully, now your phone will reboot automatically and welcome you with the setup screen.
Now, wait for the process to complete, once it finishes, the phone will boot up and will be directed to the Welcome screen. Now, set up your phone accordingly by following the on-screen instructions.
Update the Software
Most of the problems occur due to an outdated version of software running on the device. Hence, after you have performed the hard reset on your tablet, now try to check for the latest version of the update and if available, then download and install it on your tablet.
Downloading and installing the latest updates is very simple and can be done by following below simple steps.
- Head over to “Settings”.
- Scroll down to the bottom and tap “About tablet->System Update”.
- Further, follow the on-screen instructions to download and install the update (If available any recent updates).
If any recent version of the update is available, then download and install it on your Lenovo Tab P11 Plus.
Conclusion
Is your Lenovo Tab P11 Plus stuck on Logo? If yes, then your tablet is suffering from boot loop issues. Usually, the boot loop issue occurs due to malicious third-party apps, bugs in the software, or cluttered data stored in the cache memory of the phone.
To cope with boot loop issues, you should start the troubleshooting process by force restarting your tablet, wiping the cache partition, trying to boot into safe mode, and at last, performing a hard reset on your Lenovo Tab P11 Plus could resolve this issue.