How To Fix Motorola Hotspot Not Working? Try out these FIXES

With the help of a hotspot feature on your smartphone, you can share an internet connection with other devices. What if the hotspot suddenly stops working on your phone? Is the Mobile hotspot not working on your Motorola?

What are the possible reasons behind the hotspot not working issue?

• You might be entering the wrong password.
• There might be low cellular coverage on the phone-sharing hotspot network.
• There might be issues with the network settings on your phone.
• The power saving mode enabled on your phone might be causing issues.
• Bugs in the software of your phone.

There are multiple ways to eliminate the hotspot issue on your Motorola device. In this guide, you will find an easy way to resolve this particular issue.

Motorola Hotspot Not Working

If you are suffering from a hotspot issue on your Motorola device, then you need to run the troubleshooting process with the help of some proven fixes.

Let’s start with these fixes one by one and by the end of this guide, you will see the hotspot will start working on your smartphone.

1. Perform Soft Reset
2. Check Distance
3. Check Signal Strength
4. Update the Software
5. Make Sure Data Saver Mode is Disabled
6. Deactivate Other Connectivity Medium (Bluetooth)
7. Disable Airplane Mode
8. Disable Cellular Network on your Phone
9. Refresh Your Mobile Hotspot
10. Disable All Downloads
11. Disable VPN
12. Deactivate Battery Saving Mode
13. Enable Bluetooth tethering
14. Perform Network Reset
15. Perform Factory Data Reset

Perform Soft Reset

Sometimes, a minor glitch in the device software happens to cause such an issue. These types of minor problems can be very well eliminated by performing a soft reset on your device.

Follow the steps below:

• Press and hold the “Power/Lock” button until the power option appears on the screen.
• Now, select the “Power Off” option and then tap “Power Off” to confirm.
• Once, the phone is turned Off completely, now wait for several seconds and then turn it back ON with the help of the Power button.

That’s it, you have successfully performed a soft reset on your Motorola device.

Check the Distance

The range of hotspot varies depending on your device’s WiFi hotspot protocol. Normally, it can provide a range of between 65 to over 300 feet.

Therefore, you need to be in a range. Try to reduce the distance between the main mobile hotspot device and other phones.

Check Signal Strength

The Hotspot problem might also occur due to the weak signal strength of your device’s cellular network. If the signals are weak, then your device might be unable to share the hotspot network with another device.

Hence, make sure that the signal strength is strong.

Check For the Recent Software Update

Most of the problems occur due to an outdated version of software running on the device. Hence, you need to check for the latest update and if available, then download and install it on your smartphone.

1. Head over to “Settings”.
2. Next, tap “About Phone”.
3. Scroll down to the bottom and tap “System Updates”.

If any recent version of the update is available, then download and install it on your Motorola device.

Make Sure Data Saver Mode is Disabled

There are several options in the network settings that are by default enabled on your phone or you might have enabled them when they are required.

But all the options are not feasible for a particular feature such as a hotspot. One of these options includes a Data Saver Mode that needs to be disabled on your phone while connecting to a hotspot.

The data saver mode’s aim is to save data and hence limit data consumption which might cause network interruptions and other related issues.

1. Head over to “Settings” on your phone.
2. Next, tap “Network & Internet”.
3. Further, tap “Data Saver”.
4. Finally, turn OFF the “Data Saver Mode”.

Deactivate Other Connectivity Medium (Bluetooth)

Before enabling the Hotspot network, you need to disable Bluetooth on your device. This is because both of these mediums might be using the same frequency bands such as 2.4GHz which might cause the interference issue.

Therefore, it’s better to disable Bluetooth in the first place. Contrary to this, if your device is supporting both 2.4 GHz and 5GHz bands, then you can switch your Hotspot network to the 5GHz band to eliminate Bluetooth interference.

1. Head over to “Settings->Network & Internet”.
2. Further, tap “hotspot & tethering–>Mobile hotspot”.
3. Next, tap the “Advanced” option.
4. Now, tap the “AP Band” option at the bottom to change the band.

Disable Airplane Mode

Check whether you have turned ON the Airplane mode accidentally on your devices. If so, then you will be unable to use the Hotspot feature.

The Airplane mode enabled on your device would disable all the other connectivity mediums such as WiFi, cellular Network, and Mobile hotspots.

Therefore, disable the Airplane mode on your Motorola device.

Disable Cellular Network on your phone

If the cellular connection is enabled on your phone while connecting to a Hotspot network, then this might cause an issue due to network prioritization. Your phone will prioritize the connection based on the network quality.

If the cellular network such as 3G, 4G, and 5G is more stable than your desired hotspot network you are connecting to, then it will automatically try to connect to the cellular network.

Therefore, to avoid this issue, you might need to turn OFF the cellular network on your device.

Refresh Your Mobile Hotspot

There might also be a possibility of a minor glitch in your network settings. Therefore, to get the network back on track, this can be done with a simple refresh. To do that, simply disable the Hotspot on your device and then wait for some time.

After a few minutes of time, again enable the Hotspot on your device.

Disable All Downloads

There might be several apps automatically updating in the background on your smartphone which could slow down the network and causes connection issue.

You need to check and disable all the apps for auto-updates on your smartphone. Also, pause all downloading such as OS updates, movies, and music on your smartphone.

Disable VPN

You can’t ignore the VPN if you are facing any network issues on your device. Most of the time, the VPN is the real culprit behind the network issue.

Therefore try to avoid VPN in the first place when connecting your device to a mobile hotspot. Disable the VPN on your smartphone while using the Hotspot.

Disable Battery Saving Mode

This feature is helpful at a time when your primary concern is battery power. It reduces the performance of your device to enhance the battery power of your device due to which many of the features are unable to perform well.

Hence, you need to disable the power saving on your phone.

• Head over to the “Settings”.
• Next, tap “Battery” and then “Battery Saver”.
• Finally, tap the “Turn Off” option to disable it.

Enable Bluetooth tethering

There is also an alternative option to a mobile hotspot when sharing an internet connection with other devices. With the help of Bluetooth, you can connect your smartphone to other phones to share an internet connection.

1. Head over to “Settings->Network & Internet”.
2. Scroll down to “Hotspot and Tethering”.
3. Next, enable the “Bluetooth Tethering” option.
4. Now, connect your phone with the help of Bluetooth.

Perform Network Reset

Performing a network reset on your phone might resolve the network issue well.

1. Head over to “Settings->System->Advanced”.
2. Further, tap the “Reset” option.
3. Now, tap “Reset Wi-Fi, Mobile & Bluetooth”.
4. Finally, tap “Reset Settings->Reset Settings”.

This will reset all the network settings including Wi-Fi, Mobile Data, and Bluetooth.

Perform Factory Data Reset

This method is very effective and worth considering when facing any kind of issue on your device. This will restore all the settings to the factory default settings.

But you need to take a complete backup of your important data as it will wipe all the available data on your device.

Here are the steps below:

1. Head over to “Settings->Systems”.
2. Further, tap “Advanced”.
3. Then, tap “Reset options”.
4. Finally, “Erase All data (factory Reset)–>Erase All Data”.

Once, the process gets complete, your device will automatically restart, wait until it boots up again, and then set it up accordingly from the beginning.

Conclusion

If the hotspot is not working on your Motorola device, you can easily fix this issue by simply rebooting your device and then resetting the network settings. Apart from this, try to update the phone software. Disable Data saver mode and power saving mode on your device.

You can also try an alternative option by using Bluetooth tethering for sharing the internet connection. At last, you should go for the factory data reset option.