It’s a very frustrating moment when you try to scan the QR code with your smartphone and it doesn’t work. If you have owned the OnePlus Nord N10 5G phone and facing the same issue, then we have got some fixes for you that are covered in detail in this guide.
The scanning QR code may fail due to several reasons and so you might consider these into account to avoid the hitch.
How To Fix OnePlus Nord N10 5G QR Code Scanning Not Working?
Enable the Google Lens suggestions in the camera app settings on your OnePlus Nord N10 5G. Here’s how you can do that:
- Launch the camera app.
- Next, tap on “Settings”.
- In Settings, locate the option, Google Lens suggestions, and then enable it.
Now, try to scan the QR code, and hopefully, it will start working now on your OnePlus Nord N10 5G. If still, you are facing issues, then head over to other fixes and try them one by one.
- Soft Reset your Phone
- Clear the App Cache
- Position the QR Code Properly
- Remove Smudges From Camera Lens
- Long press Screen while Scanning QR Code
- Prefer Google Lens over other apps
- Use the Best third-party apps For QR code Scanning
Soft Reset your OnePlus Nord N10 5G
The most recommended method to adopt at first while facing any kind of issue is to soft reset your phone. This also refers to restarting/rebooting your phone. Follow the steps below:
- On your OnePlus Nord N10 5G, swipe down the notification panel to expand the options.
- Next, tap on the “Power” icon.
- Now, it will appear with multiple power options.
- After that tap on the “Power OFF” option.
- Once, you do that, now your OnePlus Nord N10 5G will successfully turn OFF.
- After several seconds, turn ON back your phone by long pressing the “Power” button.
Clear The App Cache
- Head over to “Settings” on your phone.
- Next, tap on “Apps”.
- Now, locate and tap on the camera apps.
- After that, tap on “Clear Data -> Clear Cache”.
Position the QR Code Properly
When you are about to scan the QR code on your OnePlus Nord N10 5G, you need to make sure that the QR code is positioned at the center. Once, It is at the center then tap on the QR code to let the camera focus on it.
When the camera starts focusing on the QR code, then wait for a few seconds, and hopefully, it will respond with content embedded in that code.
Apart from this, you should also allow some distance between the QR code and the camera. Because the camera won’t identify or start focusing at a very closer position or too far away. Therefore, you need to make a particular distance at which the camera could easily start focusing on the QR code.
Remove Smudges From Camera Lens
Most of the time, this problem occurs due to dirty lenses, and hence the camera is unable to make focus on the QR code. This is also one of the reasons that may results in the Scanning QR Code not working.
Therefore, clean the lenses of the camera first and then wipe them with a soft cloth or use tissue paper. Hopefully, after doing this, you will witness the camera will start focusing on the QR code easily without taking too much time.
Long Press The Screen While Taking Scanning QR Code
After targeting the QR code with your camera and it starts scanning, but you didn’t get any response, then try out this hack. Hopefully, you will get the required result by scanning the QR code.
This hack includes directing your default camera app to launch Google Lens, here’s how you can do that.
- Open the camera app.
- Next, at a specific distance position the QR code in the middle to let the camera start focusing.
- Once, the camera starts focusing and you still didn’t get any results, just long-press the screen (Tap and hold the screen).
- Hence, the camera app will be directed to Google lens to play its part. Now, Google lens will provide you with the result against this QR code and you can further simply tap on the results to launch it.
Prefer Google Lens over other apps
Google lens is one of the best and recommended apps to scan QR codes easily and provide you with an instant response. Therefore, by using the default camera app to scan the QR codes, there might be an issue such as your camera app couldn’t have this feature to scan QR codes or launch the Google lens to do it for you.
In that particular case, you may need to download and install the Google Lens application and starts using it for scanning QR codes in the future. Hopefully, you will find this app quick and fast.
After installing Google Lens on your smartphone, you need to enable the Google Lens suggestions in the camera app settings. This will make it easier for the Google lens app to scan QR codes more quickly and fast.
How To Enable Google Lens Suggestions on OnePlus Nord N10 5G?
- Launch the camera app.
- Next, tap on “Settings”.
- In Settings, locate the option, Google Lens suggestions, and then enable it.
Install and Use the Best Third-Party Apps For QR Code Scanning
At last, when the built apps are not working for you, then you can approach the third-party apps as well. There are some popular and recommended third-party apps that have the ability to scan the QR code in a matter of a few seconds.
You can download and install the QR & Barcode Reader Scanner on your OnePlus Nord N10 5G. This app has a more user-friendly interface and can quickly scan the QR code without any hitch.
Conclusion
In short, you should try out all these fixes whenever you face the issue “scanner QR code not working”. Hence, by following these fixes you can easily resolve this.
These fixes include soft resetting your phone, positioning the QR code properly in the middle, clearing the app cache, removing the smudges from the lens, long-pressing the screen while scanning the QR code, using the Google lens app, and using the best third-party apps for scanning QR codes.